Wind Speed
Wind Direction
Wind Alarms
Wind Speed\Direction Transmitters
Barometric Pressure
Air Temperature and Humidity
RainFall
Solar Radiation
Displays & Recorders
Accessories
Weather Station
Electric Power Systems
Product InformationTechnical SpecificationDownloads
anemometer, cup anemometer, direction wind, , meteorological instrument,  sensor wind,  speed meter, weather equipment, weather instrument, wind anemometer, wind direction indicator, wind meter, wind speed indicator, wind indicator, wind speed meter, weather station equipment, weather measuring instrument Favonius, Model A75-104 Anemometer Accuracy: 2 < 10 MPH +/- 1MPH 10 - 200 MPH - +/- 5% of reading Temp range "-55 / 60 C"
Use: General Monitoring
Durability Rating: 8
Related products
 A70-SL transmitter
 A72-SL transmitter
 A96 Thor Surge Suppresor
 A76 Mounts
APPLICATIONS: 
  • Research measurements in environmental studies
  • Engineering studies on wind effects on bridges, skyscrapers
  • Control anemometer for new or existing wind turbines
  • Anemometer for wind resource assessment instrumentation

 

FEATURES: 

  • Completely self-powered with self-contained alternator.
  • Very simple, elegantly engineered construction.
  • Dirt and water resistant materials.
  • All three cups molded in one piece for repeatable performance.
  • Frequency output for ease of filtering and long cable runs.
  • Professional qualities at a minimum price.
Site Search

TECHNICAL SPECIFICATION:

Threshold: starting threshold - 0.75 m/s 
(1.75 mph). Cup distance constant (63% recovery) - 3.0m (10 ft.)
Materials: Cups one piece injection molded black polycarbonate (Lexan).
Body housing is black ABS plastic.
Shaft beryllium copper - fully hardened.
Bearing modified Teflon, self-lubricating. Rate Pv factor of 20,000 (at 15 mph, Pv is approx. 500; at 100 mph, Pv is approx. 2,000). 
Upper Bearing is centered in the place of cup thrust for optimal loading.
Permanent magnet Indox 1, 25 mm (1 in) dia., 
13 mm (0.5 in) long, 
4 poles.
Weight:  0.1 kg (0.2 lb.)
Dimensions:  3 cups conical cross-section - 51 mm ( 2 in.) dia.
Swept diameter of rotor - 190 mm (7.5 in.) Overall height - 51 mm (3.2 in.).
Moment of Inertia of rotor assembly =
68 x 10-6 S - ft2
Mounting: using a cotter pin on 
a 13 mm (0.5 in.) diameter mast with a #35 hole 11 mm (.35 in.) from the top.
Electrical: Single coil, bobbin wound, 4100 turns of #41 wire.
Voltage is a sine wave with frequency changing linearity with wind speed - 60Hz = 102 mph.
Voltage is 2.0 VAC @ 60 cycles.
Environmental: Operating temperature 55 to 60° C (-67 to 150° F).
Operating 
humidity range:
0 - 100% RH.
Product Specification Sheet:  Model A75-104 Anemometer